Spacewalk E1 Product Support
1/ QG
| Performance indictors | Detailed parameters | Detailed parameters sub |
|---|---|---|
| Product dimension | 119x49x12 cm | 46.8 x 19.3 x 4.8 inch |
| Walking Area | 38 x 102 cm | 15x 40.2 inch |
| Gross weight | 21.2 KG | 46.7 Lbs |
| Net weight | 18.2 KG | 40.1 Lbs |
| Maximum load | 110 KG | 242 Lbs |
| Minimum speed | 0.6 mph | / |
| Maximum speed | 4 mph | / |
| Rate voltage | 110-120V ~ | / |
| Rated power | 550 W | / |
| Peak horsepower | 2.25Hp | / |
| Suggested age | 14-60 years old | / |
2 / How to video
Faqs
I bought two Spacewalk E1's. The remotes interfere with each other, how do I set it up as a 1 to 1 control?
Please pair the remote control with the treadmill separately. Make sure the other treadmill is off when you are matching the code. The steps are as follows: 1. Switch off the treadmill 2. Press the ‘Start’ and ‘+’ buttons on the remote control at the same time, and the indicator light of the remote control will flash. 3. Turn on the power switch, after the sound of drops, the code is successful.
Remote control does not work
Please re-pair the remote control with the treadmill. The steps are as follows: 1. Switch off the treadmill 2. Press the ‘Start’ and ‘+’ buttons on the remote control at the same time, and the indicator light of the remote control will flash. 3. Turn on the power switch, after the sound of drops, the code is successful.
Treadmill doesn't work when switch is on
1.Check if any codes appear on the display； 2、If there is no error code,just a slow running belt, then tighten the running belt
The screen displays E02
Please open the motor cover and check if the carbon brush cover is detached. If it is detached, please contact the customer service centre to resend the carbon brush cover.
The treadmill doesn't work when someone stand on it
Please open the motor cover and check that the wiring control is properly installed
The screen displays E04
Please open the motor cover and check that the wiring control is properly installed
The screen displays E05/U01 Or the treadmill doesn't work Or sudden stop during use
Please open the motor cover and check that the wiring control is properly installed
